You'll need:
-two straws
-one cup full of water to the brim (or as close as you can get it without spilling it)
-one pair of scissors
What you do:
1. Take one of the straws and line it up next to the outside of the cup. Cut off enough of it so that the length left is half the length of the cup.
2. Put the cut straw inside of the cup so that only about 1/2 an inch of it is above the rim of the cup. Make sure not to pinch its top shut.
3. Take your other straw and put about 1/4 of an inch away from the straw in the water at a 270 degrees (next line)
angle (you might want to be slightly even lower than that) and blow REALLY hard (make sure you're aiming for the straw in the water's top, not the water itself).
What this means:
What happened? Water should have come out of top of the straw that was in the cup! What does this illustrate? Air pressure. The straw in the cup is kind of like a bird's wing. When you blow across the top of the straw, it is like the air pressure on top of the wing, which doesn't push as hard as the air pressure below it. The water that comes out of the top of the straw is the air pressure below the wing, pushing the wing up harder than it is pushing it down. This causes a bird to fly, or be lifted by air pressure.
No comments:
Post a Comment